Heat & Glo COSMO Gas Fireplace Insert

Starting at $3,625

No more drafty, dated fireplaces. No more messy maintenance. No more soot and smoke. It’s time for an immediate upgrade, with interest.

Ditch the logs completely. Go modern. A ribbon of flame and glistening glass interior take your fireplace transformation to the next level.

  • 13,500 - 28,000 BTUs
  • 30 or 35-inch viewing areas
  • Customize your look with distinctive interior options

Key Features and Technologies

Direct Vent Technology

Direct Vent Technology

With Direct Vent Technology, your fireplace can use outside air for combustion, expelling 100 percent of the combustion exhaust and by-products.

IntelliFire Touch

IntelliFire Touch

Provide your main text here...

Limited Lifetime Warranty

Limited Lifetime Warranty

Our Limited Lifetime Warranty is the strongest and most comprehensive in the industry.

Fireplace Safety

Fireplace Safety

At Heat & Glo, we are committed to your safety. We lead the industry with advanced safety developments.

Is This Product Right For You?

Room Size: (Learn More)

Small

Medium

Large

Small
Medium
Large

BTU/Hr Input: (Learn More)

13,500 to
30,000

4,000
120,000

Estimated Hourly Operating Cost: (Learn More)

$0.33

$0
$10

Recommended Maintenance: (Learn More)

None

Annual

Monthly

Weekly

None
Annual
Monthly
Weekly

Model Comparison

Reset (View All Models)

Controls

Have complete control over your fire. Controls listed are tested and approved for recommended use with the hearth systems indicated.

Fronts-Doors

The Halo front offers a modern, tailored appearance to any hearth with two color options. Or select from a variety of other front options to complement any home décor.

A surround, available in a variety of sizes, is required to fill the gap between the insert and the fireplace opening.

Media

Accent the firebox with one of these media options and make your new insert a one-of-a-kind.

Surrounds

A variety of sizes are available to fill the gap between the insert and the fireplace opening. See your dealer for more information.

Termination Options

A termination cap finishes your gas insert with a clean, upscale look. And, these durable caps also protect venting components and ensure safe exhaust flow.

Interior Panels

Complement your flame with the optional Fade-Resistant Reflective Black Glass that displays exceptional angles of the contemporary ribbon of flame.

Dimensions in inches. Refer to installation/owner's manual for detailed specifications on installing this product. Hearth & Home Technologies reserves the right to update units periodically. Product installation must adhere strictly to instructions shipped with product.

Model Specifications

Cosmo Insert 30 w/ IFT

Size:30"
Appliance Width:31-/18"
Appliance Height:20-3/4"
Appliance Depth:14-1/2"
Appliance Rear Width:19-5/8"
Front Width Minimum Firebox Opening:31-5/8"
Height Minimum Firebox Opening:21"
Depth Minimum Firebox Opening:15"
Back Width Minimum Firebox Opening:20-1/8"
BTU/hr Input:28,000
Viewing Area:27-1/2" x 15-15/16"
Ignition System:IFT

Cosmo Insert 35 w/ IFT

Size:35"
Appliance Width:36-1/8"
Appliance Height:24"
Appliance Depth:14-1/2"
Appliance Rear Width:24-5/8"
Front Width Minimum Firebox Opening:36-5/8"
Height Minimum Firebox Opening:24-1/4"
Depth Minimum Firebox Opening:15"
Back Width Minimum Firebox Opening:25-1/8"
BTU/hr Input:30,000
Viewing Area:32-1/2" x 19-3/8"
Ignition System:IFT

Efficiency

Cosmo Insert 30 w/ IFT

Canada EnerGuide:69.8%

Cosmo Insert 35 w/ IFT

Canada EnerGuide:72.0%

Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

BTU: 1st hour output uses high burn efficiency number. BTU will vary depending on the type of fuel used and moisture content of the fuel.

This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used.

Fuel density and pellet shape will affect hopper capacity.

Weighted Average LHV (Low Heating Value) efficiency.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner's manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner's/installation manual.

*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.

This site brought to you by:

Who we are

Privacy

Site Map

©2020 Fireplaces.com. All Rights Reserved

Fireplaces

Outdoor Fireplace

Gas Fireplace Inserts

Wood Fireplaces