Heat & Glo Northstar Wood Fireplace

Starting at $4,799

The Northstar exceeds the strictest environmental standards in the nation—so you can enjoy roaring fires even in areas where conventional wood-burning fireplaces are banned.

  • 74,900 BTUs—Heats 1,000 to 2,600 square feet based on climate and home efficiency
  • 2.7 cu ft interior capacity / 24 in. maximum log length
  • Up to 10 hours of burn time from each load of wood
  • EPA certified with emission levels of just 3.3 grams per hour

Current Offer

Sign up to Save $100

Sign up to get your personalized coupon for $100 off a fireplace, stove or insert. Offer expires 4/20/2018.


Key Features and Technologies

Limited Lifetime Warranty

Limited Lifetime Warranty

Our Limited Lifetime Warranty is the strongest and most comprehensive in the industry.

Environmental Protection Agency Approval

Environmental Protection Agency Approval

This appliance meets the U.S. Environmental Protection Agency's crib wood emission limits for wood heaters sold after May 15, 2015.


Is This Product Right For You?

Room Size: (Learn More)

Small

Medium

Large

Small
Medium
Large

Recommended Maintenance: (Learn More)

None

Annual

Monthly

Weekly

None
Annual
Monthly
Weekly

Model Comparison

Reset (View All Models)

Fronts-Doors

The beautiful cast iron door will complement any home décor.


Shelves

The shelf mantel is available in 48”, 59” or 72” lengths and with designs that accent any room.


Dimensions in inches. Refer to installation/owner's manual for detailed specifications on installing this product. Hearth & Home Technologies reserves the right to update units periodically. Product installation must adhere strictly to instructions shipped with product.

Model Specifications

NORTHSTAR

Appliance Width:40"
Appliance Height:40-1/4"
Appliance Depth:23-1/8"
Appliance Rear Width:40"
Framing Width:42-1/4"
Framing Height:43-7/8"
Framing Depth:24"
Framing Front Width:42-1/4"
Framing Back Width:42-1/4"
Peak BTU/hr Output:74,900
Heating Capacity:1,000 - 2,600 sq ft
Viewing Area:37 x 31-1/8"
Efficiency:77.2%

Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

Framing depth will vary if you are installing the lower profile power vent (PVLP-SLP) with a minimum vent configuration. 12-1/2” is needed from the back of the appliance to the outside of the exterior wall. Refer to manual for details.

BTU: 1st hour output uses high burn efficiency number. BTU will vary depending on the type of fuel used and moisture content of the fuel.

BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.

This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used.

Fuel density and pellet shape will affect hopper capacity.

Weighted Average LHV (Low Heating Value) efficiency.

Heat output will vary depending on the type of fuel used. The flame and ember appearance may vary based on the type of fuel burned and the venting configuration used. Actual product appearance, including flame may differ from image shown. Refer to the owner's manual for complete clearance requirements and specifications. Product specifications and pricing subject to change without notice. For testing and listing information please refer to the owner's/installation manual.

*For select products: Heating capacity to be used as a guide only. See your local dealer for help in determining the product that best suits your heating needs based on climate and home efficiency.

†For wood-burning appliances: Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used, and installation.


Product Brochures

Installation Manuals

Owner's Manuals

Service Parts

Architect Guides

CAD Drawings