Monessen Hearth Berkley Oak Ceramic Vent Free Gas Log Set

Starting at $883

These dual rated, Berkley Oak, gas log sets can be installed in a vented or vent free setting. With three sizes to choose from, these 7-piece ceramic fiber log sets provide radiant heat and an attractive focal point.

Available Sizes:

  • 18"
  • 24"
  • 30"

Model Comparison

Reset (View All Models)

Accessories that fit your home and lifestyle


Dimensions in inches. Refer to installation/owner's manual for detailed specifications on installing this product. Hearth & Home Technologies reserves the right to update units periodically. Product installation must adhere strictly to instructions shipped with product.

Model Specifications

Berkley Oak 18 - Ceramic Fiber

Size:18
Front Width Minimum Firebox Opening:SCS: 26"; MIL: 26"
Height Minimum Firebox Opening:SCS: 17"; MIL: 17"
Depth Minimum Firebox Opening:SCS: 13"; MIL: 13"
Back Width Minimum Firebox Opening:SCS: 18"; MIL: 18"
Fuel Type:Natural Gas or Liquid Propane
BTU/hr Input:28,000 NG / 27,000 LP
Heating Capacity:Up to 950 sq ft
Efficiency:99.90%
Ignition System:Millivolt or SCS

Berkley Oak 24 - Ceramic Fiber

Size:24
Front Width Minimum Firebox Opening:SCS: 31"; MIL: 29"
Height Minimum Firebox Opening:SCS: 17"; MIL: 17"
Depth Minimum Firebox Opening:SCS: 13"; MIL: 13'
Back Width Minimum Firebox Opening:SCS: 25-1/4"; MIL: 22-1/4"
Fuel Type:Natural Gas or Liquid Propane
BTU/hr Input:37,000
Heating Capacity:Up to 1,300 sq ft
Efficiency:99.90%
Ignition System:Millivolt or SCS

Berkley Oak 30 - Ceramic Fiber

Size:30
Front Width Minimum Firebox Opening:SCS: 33"; MIL: 33"
Height Minimum Firebox Opening:SCS: 17"; MIL: 17"
Depth Minimum Firebox Opening:SCS: 13"; MIL: 13"
Back Width Minimum Firebox Opening:SCS: 25-1/4"; MIL: 25-1/4"
Fuel Type:Natural Gas or Liquid Propane
BTU/hr Input:37,000 NG / 36,000 LP
Heating Capacity:Up to 1,300 sq ft
Efficiency:99.90%
Ignition System:Millivolt or SCS

Appliance Depth includes entire unit including depth of firebox and extension onto hearth.

Framing depth will vary if you are installing the lower profile power vent (PVLP-SLP) with a minimum vent configuration. 12-1/2” is needed from the back of the appliance to the outside of the exterior wall. Refer to manual for details.

BTU: 1st hour output uses high burn efficiency number. BTU will vary depending on the type of fuel used and moisture content of the fuel.

BTU/hr Input based on maximum feed rate per hour multiplied by approximately 8600 BTU, which is average BTU from a pound of pellets.

This is a general guide, see your local dealer for help in determining the product that best suits your heating needs based on climate, home efficiency, location of the heater, and air movement in the room.

Actual burn times will vary based on how the appliance is operated, load size, moisture content and type of wood used.

Fuel density and pellet shape will affect hopper capacity.

Weighted Average LHV (Low Heating Value) efficiency.


Product Brochures

Owner's Manuals